Welcome to GJMakerspace! Contribute something by using the edit button above!
Welcome to the GJmakerspace Wiki
Information, knowledge, rules, procedures, and other topics are documented here.
Who We Are:
We are membership based community, non-profit, workshop/laboratory providing tools, knowledge, and learning resources for our members.
Capabilities - Equipment
6 FDM(Fused Deposition Modeling) style printers. These style printers use a filament that is extruded through a heated nozzle in a series of layers.
1 SLA(Stero-lithography) Photo-resin polymer based 3D printer These style printers use a laser to harden liquid resin in a series of layers.
2 Laser Systems
How to Find Us
We are located in the The Business Incubator Center
Coming in from Grand Junction, go over the 5th street bridge toward Orchard Mesa. Bear right (and turn right) at the intersection of 26 ¼ road (and Unaweep) This will bring you into the cemetery. Follow the signs through the cemetery. At the bottom of the hill, turn to the left past the Department of Energy complex. Take your next right hand turn, going over the railroad tracks and into the Business Incubator complex. The building straight ahead as you enter through the gate is the administration building and the GJmakerspace is on the left side of the building, enter through the double brown doors and go straight ahead to the main room.
GJMakerspace:Laser from DXF file